Symptom

Dryersqueaking

The short answer

A squealing or thumping dryer is usually worn drum rollers, a worn idler pulley or a rear drum bearing. All three run $180 to $500 installed. None of it is urgent on its own, with one exception: a burning smell along with the noise means stop using the dryer now.

A technician crouched behind a dryer pulled forward from the wall, holding a long flexible lint brush.

What to check, in order

Free checks first. The cheap causes are also the common ones.

Run it empty first

A load of sneakers sounds exactly like a mechanical fault. Take everything out and run the dryer for thirty seconds before you call anybody.

Listen to what kind of noise it is

A high squeal that rises as the drum speeds up is usually the idler pulley. A steady thump or rumble in time with the drum turning is usually the drum rollers. A deep grinding is more likely the rear drum bearing, which is the longer job at $250 to $500.

Check the drum seam

A coin or a screw wedged between the drum and the front bulkhead scrapes in a way that sounds just like a bearing. It costs nothing to fish out and it is worth ruling out first.

Check it is sitting level

A dryer that rocks knocks against its own cabinet, and that sounds far worse than it is. Adjust the feet until the machine does not move when you push a corner.

Where to stop

The rollers, the pulley and the bearing all live behind the cabinet, so reaching them means taking the front or the back off the machine. That is the point to call. A squeal on its own often runs for weeks without getting worse, so it is not an emergency. A burning smell is a different matter: a seized roller rubs against a drum full of lint and gets genuinely hot, so unplug it and leave it until somebody looks at it.

  • Behind a panel there are live terminals, sharp edges and sometimes a sealed refrigerant circuit.
  • Replacing a part you guessed at is the expensive way to diagnose. A meter settles in a minute what a parts order settles in a week.
  • If the machine is inside a manufacturer warranty, opening it yourself can end that cover.
  • A burning smell or a scorched connector means stop, unplug it and leave it.

What the repair runs if it is not a free fix

PartTypical range
Heating elementRuns but will not heat, on an electric dryer$180 to $400
Thermal fuse or cycling thermostatCheck before the element. A blown fuse is frequently a symptom of a blocked vent rather than a fault$120 to $260
Igniter or gas valve coilThe gas dryer equivalent of a failed element$180 to $420
Drum rollers, idler pulley or beltSquealing, rumbling or thumping$180 to $400
Rear drum bearingA deeper noise than the rollers, and a longer job$250 to $500
Moisture sensorShutting off early on an auto dry cycle$140 to $300
Door switch or start switchWill not start at all$120 to $260
Blower wheelPoor airflow where the vent is already clear$180 to $380

For comparison, a replacement typically runs $650 to $1,500 installed, which is the figure to compare against rather than the shelf price.

Questions people ask

Can an older dryer still be worth fixing?

If one part failed on a machine that has been fine until now, fix it. The price on the tag hides the rest of it: delivery, hauling the old one away, and any work the opening needs. Find out what broke and what the part costs, then decide.

How much does dryer repair cost?

It depends on which part failed, and that is not a dodge. The spread is real. Age matters through parts, not labor. A current model takes a stock part. An older one may need a part that has to be ordered in. Ask for the full price, parts and labor together, not just the part.

What brands are worth repairing?

Whirlpool, GE, Maytag, Frigidaire and LG cover most kitchens around here, and parts for all of them are current. Several brands are built on the same platform, so a drain pump or a drive motor is often the same part under two names. Ask what the part is and whether anybody still makes it.

Related questions

Repair or replace a refrigeratorRepair it if the sealed system is sound and the part is still made.Repair or replace an appliance in an older houseIn an older house this is a fit question before it is an appliance question.How long appliances lastMost major appliances last 8 to 20 years.

Past the free checks?

Call with the model number and the list of what you already tried.

(716) 414-5233
Call (716) 414-5233