Appliance repair

Oven, range and stoverepair

What goes wrong, which part it usually is, and what moves the price.

$140 to $700Typical for the part plus the labor to fit it. The part is what sets the price, so the diagnosis comes before the figure.

The short answer

Any oven, range and stove repair is two jobs: finding out what broke, and the part to fix it. Most of the time the part that failed is a cheap one, so a tech checks those first.

A technician crouched at an open oven door, reaching into the empty cavity with a nut driver.

What usually fails

  • Oven will not heat, which is the bake element, the igniter on a gas range or the control board
  • Heats to the wrong temperature, normally the oven sensor rather than the thermostat
  • A burner that will not light, usually the igniter or a blocked port
  • An element that stays on, which is a failed relay on the control board and is a hazard
  • The door not sealing, which shows up as long cook times before anything else

The part sets the price, not the appliance and not where you live. Have the model and serial number off the sticker when you call. Two machines with the same name on the door can take different parts, and the sticker is the only thing that tells us which.

Typical ranges by part

PartTypical range
Bake or broil elementElectric oven that will not heat. Usually visible as a break in the element$160 to $350
Oven sensorHeats to the wrong temperature. Replaced far more often than a thermostat$140 to $320
Surface burner igniterA gas burner that clicks without lighting$150 to $340
Oven igniterThe usual cause of a gas oven that will not heat$180 to $400
Door hinge or gasketLong cook times, where the door is not sealing$180 to $420
Control board or relayAn element that stays on is a relay failure and is a hazard, not an inconvenience$320 to $700

For comparison, a replacement typically runs $900 to $2,400 installed, which is the figure to compare against rather than the shelf price.

Before you call

Where to find the model numberThe model number, the symptom in your own words, when it started, and what you have already tried.

Questions people ask

What information helps most on the phone?

Start with the sticker. It is usually easier to find than people expect. Read out any error code exactly as it shows, letters and numbers both. The same code means different things on different models. Call with the numbers off the sticker and a plain description of the fault.

What brands are worth repairing?

Brand matters less than people expect, and parts supply matters more. Sealed system parts are brand specific. That is the one place the name on the door really changes the job. The model number answers this. Have it ready.

Which appliance problems need attention first?

Two questions sort it out: is anything getting wet, and is anything going bad. If a freezer is failing, move the food to another freezer. That buys you the time to get it looked at properly. Call and put it in your own words. You do not need the right words for it.

Can an older oven and range still be worth fixing?

Compare the repair against what a new one costs delivered and fitted, not against the price on the tag. A new washer is not automatically a more reliable one. Front loaders and newer top loaders carry electronics the machine they replaced never had. The diagnosis answers this. Call and get one.

Can I still get parts for an old appliance?

An appliance built before control boards is often very repairable. The sticking point is a circuit board from a model that sold in small numbers, because nobody reproduces those. Ask about the part, not the age of the machine.

How much should a repair cost?

The honest answer is a range. The same symptom can have a cheap cause or an expensive one. Rule out the cheap failures first. A start relay and a condenser fan motor are both inexpensive, and between them they explain a lot of fridges that stop cooling. Ask what the diagnosis found and what the part costs before you agree to it.

Other appliances

The rest of what gets fixed

Get it diagnosed

Ask for the repair price before any work starts.

(716) 414-5233
Call (716) 414-5233