What goes wrong, which part it usually is, and what moves the price.
$120 to $420Typical for the part plus the labor to fit it. Compressor or sealed system is a different class of job and is quoted on its own.
Any freezer repair is two jobs: finding out what broke, and the part to fix it. Most of the time the part that failed is a cheap one, so a tech checks those first.

The part sets the price, not the appliance and not where you live. Have the model and serial number off the sticker when you call. Two machines with the same name on the door can take different parts, and the sticker is the only thing that tells us which.
| Part | Typical range |
|---|---|
| Defrost heater or thermostatWarming while still running, or heavy frost | $180 to $420 |
| Evaporator fan motorUpright freezers. A chest freezer has no fan | $160 to $350 |
| Door gasketFrost at the seal line, or a lid that does not sit down | $140 to $350 |
| Start relay or overloadWill not start, or clicks and stops | $120 to $260 |
| Thermostat or cold controlRunning constantly, or not cold enough | $140 to $300 |
| Compressor or sealed systemFrequently the point at which a chest freezer is not worth repairing | $650 to $1,500 |
For comparison, a replacement typically runs $500 to $1,400 installed, which is the figure to compare against rather than the shelf price.
You are paying for a diagnosis plus a part, and the part is the half that swings. Age matters through parts, not labor. A current model takes a stock part. An older one may need a part that has to be ordered in. Ask what the diagnosis found and what the part costs before you agree to it.
Have the model and serial number in front of you. Keep any paperwork you have. A machine still inside the maker's warranty takes a different route entirely. Have the model number and the error code ready when you call.
Sometimes, yes. A few faults really are ones you can fix yourself, and they are worth ruling out before you pay anyone. The line is the panel. Behind it are live terminals, sharp edges and sealed refrigerant, and none of that is a first try job. Stop at the panel and call us.
Across the common brands, the things that fail are more alike than different. Several brands are built on the same platform, so a drain pump or a drive motor is often the same part under two names. Ask what the part is and whether anybody still makes it.
Age is not the obstacle people expect. Parts nobody makes any more are. Doorways and stair turns in an old house decide whether a new machine can physically reach the kitchen at all. The sticker on the machine answers this. Have the numbers ready.
Two questions sort it out: is anything getting wet, and is anything going bad. If a freezer is failing, move the food to another freezer. That buys you the time to get it looked at properly. Call us and describe the symptom. That is what sets the priority.